Skip to main content

Error Codes

Here is the error JSON payload:

{  "code":-1121,  "msg":"Invalid symbol."}

Errors consist of two parts: an error code and a message.
Codes are universal,but messages can vary.

10xx - General Server or Network issues#

-1000 UNKNOWN#

  • An unknown error occured while processing the request.

-1001 DISCONNECTED#

  • Internal error; unable to process your request. Please try again.

-1002 UNAUTHORIZED#

  • You are not authorized to execute this request.

-1003 TOO_MANY_REQUESTS#

  • Too many requests queued.
  • Too many requests; please use the websocket for live updates.
  • Too many requests; current limit is %s requests per minute. Please use the websocket for live updates to avoid polling the API.
  • Way too many requests; IP banned until %s. Please use the websocket for live updates to avoid bans.

-1004 DUPLICATE_IP#

  • This IP is already on the white list

-1005 NO_SUCH_IP#

  • No such IP has been white listed

-1006 UNEXPECTED_RESP#

  • An unexpected response was received from the message bus. Execution status unknown.

-1007 TIMEOUT#

  • Timeout waiting for response from backend server. Send status unknown; execution status unknown.

-1010 ERROR_MSG_RECEIVED#

  • ERROR_MSG_RECEIVED.

-1011 NON_WHITE_LIST#

  • This IP cannot access this route.

-1013 INVALID_MESSAGE#

  • INVALID_MESSAGE.

-1014 UNKNOWN_ORDER_COMPOSITION#

  • Unsupported order combination.

-1015 TOO_MANY_ORDERS#

  • Too many new orders.
  • Too many new orders; current limit is %s orders per %s.

-1016 SERVICE_SHUTTING_DOWN#

  • This service is no longer available.

-1020 UNSUPPORTED_OPERATION#

  • This operation is not supported.

-1021 INVALID_TIMESTAMP#

  • Timestamp for this request is outside of the recvWindow.
  • Timestamp for this request was 1000ms ahead of the server's time.

-1022 INVALID_SIGNATURE#

  • Signature for this request is not valid.

-1023 START_TIME_GREATER_THAN_END_TIME#

  • Start time is greater than end time.

11xx - Request issues#

-1100 ILLEGAL_CHARS#

  • Illegal characters found in a parameter.
  • Illegal characters found in parameter '%s'; legal range is '%s'.

-1101 TOO_MANY_PARAMETERS#

  • Too many parameters sent for this endpoint.
  • Too many parameters; expected '%s' and received '%s'.
  • Duplicate values for a parameter detected.

-1102 MANDATORY_PARAM_EMPTY_OR_MALFORMED#

  • A mandatory parameter was not sent, was empty/null, or malformed.
  • Mandatory parameter '%s' was not sent, was empty/null, or malformed.
  • Param '%s' or '%s' must be sent, but both were empty/null!

-1103 UNKNOWN_PARAM#

  • An unknown parameter was sent.

-1104 UNREAD_PARAMETERS#

  • Not all sent parameters were read.
  • Not all sent parameters were read; read '%s' parameter(s) but was sent '%s'.

-1105 PARAM_EMPTY#

  • A parameter was empty.
  • Parameter '%s' was empty.

-1106 PARAM_NOT_REQUIRED#

  • A parameter was sent when not required.
  • Parameter '%s' sent when not required.

-1108 BAD_ASSET#

  • Invalid asset.

-1109 BAD_ACCOUNT#

  • Invalid account.

-1110 BAD_INSTRUMENT_TYPE#

  • Invalid symbolType.

-1111 BAD_PRECISION#

  • Precision is over the maximum defined for this asset.

-1112 NO_DEPTH#

  • No orders on book for symbol.

-1113 WITHDRAW_NOT_NEGATIVE#

  • Withdrawal amount must be negative.

-1114 TIF_NOT_REQUIRED#

  • TimeInForce parameter sent when not required.

-1115 INVALID_TIF#

  • Invalid timeInForce.

-1116 INVALID_ORDER_TYPE#

  • Invalid orderType.

-1117 INVALID_SIDE#

  • Invalid side.

-1118 EMPTY_NEW_CL_ORD_ID#

  • New client order ID was empty.

-1119 EMPTY_ORG_CL_ORD_ID#

  • Original client order ID was empty.

-1120 BAD_INTERVAL#

  • Invalid interval.

-1121 BAD_SYMBOL#

  • Invalid symbol.

-1125 INVALID_LISTEN_KEY#

  • This listenKey does not exist. Please use POST /fapi/v1/listenKey to recreate listenKey

-1127 MORE_THAN_XX_HOURS#

  • Lookup interval is too big.
  • More than %s hours between startTime and endTime.

-1128 OPTIONAL_PARAMS_BAD_COMBO#

  • Combination of optional parameters invalid.

-1130 INVALID_PARAMETER#

  • Invalid data sent for a parameter.
  • Data sent for parameter '%s' is not valid.

-1136 INVALID_NEW_ORDER_RESP_TYPE#

  • Invalid newOrderRespType.

20xx - Processing Issues#

-2010 NEW_ORDER_REJECTED#

  • NEW_ORDER_REJECTED

-2011 CANCEL_REJECTED#

  • CANCEL_REJECTED

-2013 NO_SUCH_ORDER#

  • Order does not exist.

-2014 BAD_API_KEY_FMT#

  • API-key format invalid.

-2015 REJECTED_MBX_KEY#

  • Invalid API-key, IP, or permissions for action.

-2016 NO_TRADING_WINDOW#

  • No trading window could be found for the symbol. Try ticker/24hrs instead.

-2018 BALANCE_NOT_SUFFICIENT#

  • Balance is insufficient.

-2019 MARGIN_NOT_SUFFICIEN#

  • Margin is insufficient.

-2020 UNABLE_TO_FILL#

  • Unable to fill.

-2021 ORDER_WOULD_IMMEDIATELY_TRIGGER#

  • Order would immediately trigger.

-2022 REDUCE_ONLY_REJECT#

  • ReduceOnly Order is rejected.

-2023 USER_IN_LIQUIDATION#

  • User in liquidation mode now.

-2024 POSITION_NOT_SUFFICIENT#

  • Position is not sufficient.

-2025 MAX_OPEN_ORDER_EXCEEDED#

  • Reach max open order limit.

-2026 REDUCE_ONLY_ORDER_TYPE_NOT_SUPPORTED#

  • This OrderType is not supported when reduceOnly.

-2027 MAX_LEVERAGE_RATIO#

  • Exceeded the maximum allowable position at current leverage.

-2028 MIN_LEVERAGE_RATIO#

  • Leverage is smaller than permitted: insufficient margin balance.

40xx - Filters and other Issues#

-4000 INVALID_ORDER_STATUS#

  • Invalid order status.

-4001 PRICE_LESS_THAN_ZERO#

  • Price less than 0.

-4002 PRICE_GREATER_THAN_MAX_PRICE#

  • Price greater than max price.

-4003 QTY_LESS_THAN_ZERO#

  • Quantity less than zero.

-4004 QTY_LESS_THAN_MIN_QTY#

  • Quantity less than min quantity.

-4005 QTY_GREATER_THAN_MAX_QTY#

  • Quantity greater than max quantity.

-4006 STOP_PRICE_LESS_THAN_ZERO#

  • Stop price less than zero.

-4007 STOP_PRICE_GREATER_THAN_MAX_PRICE#

  • Stop price greater than max price.

-4008 TICK_SIZE_LESS_THAN_ZERO#

  • Tick size less than zero.

-4009 MAX_PRICE_LESS_THAN_MIN_PRICE#

  • Max price less than min price.

-4010 MAX_QTY_LESS_THAN_MIN_QTY#

  • Max qty less than min qty.

-4011 STEP_SIZE_LESS_THAN_ZERO#

  • Step size less than zero.

-4012 MAX_NUM_ORDERS_LESS_THAN_ZERO#

  • Max mum orders less than zero.

-4013 PRICE_LESS_THAN_MIN_PRICE#

  • Price less than min price.

-4014 PRICE_NOT_INCREASED_BY_TICK_SIZE#

  • Price not increased by tick size.

-4015 INVALID_CL_ORD_ID_LEN#

  • Client order id is not valid.
  • Client order id length should not be more than 36 chars

-4016 PRICE_HIGHTER_THAN_MULTIPLIER_UP#

  • Price is higher than mark price multiplier cap.

-4017 MULTIPLIER_UP_LESS_THAN_ZERO#

  • Multiplier up less than zero.

-4018 MULTIPLIER_DOWN_LESS_THAN_ZERO#

  • Multiplier down less than zero.

-4019 COMPOSITE_SCALE_OVERFLOW#

  • Composite scale too large.

-4020 TARGET_STRATEGY_INVALID#

  • Target strategy invalid for orderType '%s',reduceOnly '%b'.

-4021 INVALID_DEPTH_LIMIT#

  • Invalid depth limit.
  • '%s' is not valid depth limit.

-4022 WRONG_MARKET_STATUS#

  • market status sent is not valid.

-4023 QTY_NOT_INCREASED_BY_STEP_SIZE#

  • Qty not increased by step size.

-4024 PRICE_LOWER_THAN_MULTIPLIER_DOWN#

  • Price is lower than mark price multiplier floor.

-4025 MULTIPLIER_DECIMAL_LESS_THAN_ZERO#

  • Multiplier decimal less than zero.

-4026 COMMISSION_INVALID#

  • Commission invalid.
  • %s less than zero.
  • %s absolute value greater than %s

-4027 INVALID_ACCOUNT_TYPE#

  • Invalid account type.

-4028 INVALID_LEVERAGE#

  • Invalid leverage
  • Leverage %s is not valid
  • Leverage %s already exist with %s

-4029 INVALID_TICK_SIZE_PRECISION#

  • Tick size precision is invalid.

-4030 INVALID_STEP_SIZE_PRECISION#

  • Step size precision is invalid.

-4031 INVALID_WORKING_TYPE#

  • Invalid parameter working type
  • Invalid parameter working type: %s

-4032 EXCEED_MAX_CANCEL_ORDER_SIZE#

  • Exceed maximum cancel order size.
  • Invalid parameter working type: %s

-4033 INSURANCE_ACCOUNT_NOT_FOUND#

  • Insurance account not found.

-4044 INVALID_BALANCE_TYPE#

  • Balance Type is invalid.

-4045 MAX_STOP_ORDER_EXCEEDED#

  • Reach max stop order limit.

-4046 NO_NEED_TO_CHANGE_MARGIN_TYPE#

  • No need to change margin type.

-4047 THERE_EXISTS_OPEN_ORDERS#

  • Margin type cannot be changed if there exists open orders.

-4048 THERE_EXISTS_QUANTITY#

  • Margin type cannot be changed if there exists position.

-4049 ADD_ISOLATED_MARGIN_REJECT#

  • Add margin only support for isolated position.

-4050 CROSS_BALANCE_INSUFFICIENT#

  • Cross balance insufficient.

-4051 ISOLATED_BALANCE_INSUFFICIENT#

  • Isolated balance insufficient.

-4052 NO_NEED_TO_CHANGE_AUTO_ADD_MARGIN#

  • No need to change auto add margin.

-4053 AUTO_ADD_CROSSED_MARGIN_REJECT#

  • Auto add margin only support for isolated position.

-4054 ADD_ISOLATED_MARGIN_NO_POSITION_REJECT#

  • Cannot add position margin: position is 0.

-4055 AMOUNT_MUST_BE_POSITIVE#

  • Amount must be positive.

-4056 INVALID_API_KEY_TYPE#

  • Invalid api key type.

-4057 INVALID_RSA_PUBLIC_KEY#

  • Invalid api public key

-4058 MAX_PRICE_TOO_LARGE#

  • maxPrice and priceDecimal too large,please check.

-4059 NO_NEED_TO_CHANGE_POSITION_SIDE#

  • No need to change position side.

-4060 INVALID_POSITION_SIDE#

  • Invalid position side.

-4061 POSITION_SIDE_NOT_MATCH#

  • Order's position side does not match user's setting.

-4062 REDUCE_ONLY_CONFLICT#

  • Invalid or improper reduceOnly value.

-4067 POSITION_SIDE_CHANGE_EXISTS_OPEN_ORDERS#

  • Position side cannot be changed if there exists open orders.

-4068 POSITION_SIDE_CHANGE_EXISTS_QUANTITY#

  • Position side cannot be changed if there exists position.

-4082 INVALID_BATCH_PLACE_ORDER_SIZE#

  • Invalid number of batch place orders.
  • Invalid number of batch place orders: %s

-4083 PLACE_BATCH_ORDERS_FAIL#

  • Fail to place batch orders.

-4084 UPCOMING_METHOD#

  • Method is not allowed currently. Upcoming soon.

-4086 INVALID_PRICE_SPREAD_THRESHOLD#

  • Invalid price spread threshold.

-4087 INVALID_PAIR#

  • Invalid pair.

-4088 INVALID_TIME_INTERVAL#

  • Invalid time interval.
  • Maximum time interval is %s days.

-4089 REDUCE_ONLY_ORDER_PERMISSION#

  • User can only place reduce only order.

-4090 NO_PLACE_ORDER_PERMISSION#

  • User can not place order currently.

-4104 INVALID_CONTRACT_TYPE#

  • Invalid contract type.

-4110 INVALID_CLIENT_TRAN_ID_LEN#

  • clientTranId is not valid.
  • Client tran id length should be less than 64 chars.

-4111 DUPLICATED_CLIENT_TRAN_ID#

  • clientTranId is duplicated.
  • Client tran id should be unique within 7 days.

-4112 REDUCE_ONLY_MARGIN_CHECK_FAILED#

  • ReduceOnly Order Failed. Please check your existing position and open orders.

-4113 MARKET_ORDER_REJECT#

  • The counterparty's best price does not meet the PERCENT_PRICE filter limit.

-4135 INVALID_ACTIVATION_PRICE#

  • Invalid activation price.

-4137 QUANTITY_EXISTS_WITH_CLOSE_POSITION#

  • Quantity must be zero with closePosition equals true.

-4138 REDUCE_ONLY_MUST_BE_TRUE#

  • Reduce only must be true with closePosition equals true.

-4139 ORDER_TYPE_CANNOT_BE_MKT#

  • Order type can not be market if it's unable to cancel.

-4142 STRATEGY_INVALID_TRIGGER_PRICE#

  • REJECT: take profit or stop order will be triggered immediately.

-4150 ISOLATED_LEVERAGE_REJECT_WITH_POSITION#

  • Leverage reduction is not supported in Isolated Margin Mode with open positions.

-4151 PRICE_HIGHTER_THAN_STOP_MULTIPLIER_UP#

  • Price is higher than stop price multiplier cap.
  • Limit price can't be higher than %s.

-4152 PRICE_LOWER_THAN_STOP_MULTIPLIER_DOWN#

  • Price is lower than stop price multiplier floor.
  • Limit price can't be lower than %s.

-4154 STOP_PRICE_HIGHER_THAN_PRICE_MULTIPLIER_LIMIT#

  • Stop price is higher than price multiplier cap.
  • Stop price can't be higher than %s

-4155 STOP_PRICE_LOWER_THAN_PRICE_MULTIPLIER_LIMIT#

  • PStop price is lower than price multiplier floor.
  • Stop price can't be lower than %s

-4178 MIN_NOTIONAL#

  • Order's notional must be no smaller than one (unless you choose reduce only)
  • Order's notional must be no smaller than %s (unless you choose reduce only)

-4192 COOLING_OFF_PERIOD#

  • Trade forbidden due to Cooling-off Period.

-4194 ADJUST_LEVERAGE_KYC_FAILED#

  • Intermediate Personal Verification is required for adjusting leverage over 20x.

-4195 ADJUST_LEVERAGE_ONE_MONTH_FAILED#

  • More than 20x leverage is available one month after account registration.

-4196 LIMIT_ORDER_ONLY#

  • Only limit order is supported.

-4197 SAME_ORDER#

  • No need to modify the order.

-4198 EXCEED_MAX_MODIFY_ORDER_LIMIT#

  • Exceed maximum modify order limit.

-4199 MOVE_ORDER_NOT_ALLOWED_SYMBOL_REASON#

  • Symbol is not in trading status. Order amendment is not permitted.

-4200 ADJUST_LEVERAGE_X_DAYS_FAILED#

  • More than 20x leverage is available 30 days after Futures account registration.
  • More than 20x leverage is available %s days after Futures account registration.

-4201 ADJUST_LEVERAGE_KYC_LIMIT#

  • Users in this country has limited adjust leverage.
  • Users in your location/country can only access a maximum leverage of %s

-4202 ADJUST_LEVERAGE_ACCOUNT_SYMBOL_FAILED#

  • Current symbol leverage cannot exceed 20 when using position limit adjustment service.

-4188 ME_INVALID_TIMESTAMP#

  • Timestamp for this request is outside of the ME recvWindow.