Error Codes
Here is the error JSON payload:
{
"code":-1121,
"msg":"Invalid symbol."
}
Errors consist of two parts: an error code and a message.
Codes are universal,but messages can vary.
10xx - General Server or Network issues
-1000 UNKNOWN
- An unknown error occured while processing the request.
-1001 DISCONNECTED
- Internal error; unable to process your request. Please try again.
-1002 UNAUTHORIZED
- You are not authorized to execute this request.
-1003 TOO_MANY_REQUESTS
- Too many requests queued.
- Too many requests; please use the websocket for live updates.
- Too many requests; current limit is %s requests per minute. Please use the websocket for live updates to avoid polling the API.
- Way too many requests; IP banned until %s. Please use the websocket for live updates to avoid bans.
-1004 DUPLICATE_IP
- This IP is already on the white list
-1005 NO_SUCH_IP
- No such IP has been white listed
-1006 UNEXPECTED_RESP
- An unexpected response was received from the message bus. Execution status unknown.
-1007 TIMEOUT
- Timeout waiting for response from backend server. Send status unknown; execution status unknown.
-1010 ERROR_MSG_RECEIVED
- ERROR_MSG_RECEIVED.
-1011 NON_WHITE_LIST
- This IP cannot access this route.
-1013 INVALID_MESSAGE
- INVALID_MESSAGE.
-1014 UNKNOWN_ORDER_COMPOSITION
- Unsupported order combination.
-1015 TOO_MANY_ORDERS
- Too many new orders.
- Too many new orders; current limit is %s orders per %s.
-1016 SERVICE_SHUTTING_DOWN
- This service is no longer available.
-1020 UNSUPPORTED_OPERATION
- This operation is not supported.
-1021 INVALID_TIMESTAMP
- Timestamp for this request is outside of the recvWindow.
- Timestamp for this request was 1000ms ahead of the server's time.
-1022 INVALID_SIGNATURE
- Signature for this request is not valid.
-1023 START_TIME_GREATER_THAN_END_TIME
- Start time is greater than end time.
11xx - Request issues
-1100 ILLEGAL_CHARS
- Illegal characters found in a parameter.
- Illegal characters found in parameter '%s'; legal range is '%s'.
-1101 TOO_MANY_PARAMETERS
- Too many parameters sent for this endpoint.
- Too many parameters; expected '%s' and received '%s'.
- Duplicate values for a parameter detected.
-1102 MANDATORY_PARAM_EMPTY_OR_MALFORMED
- A mandatory parameter was not sent, was empty/null, or malformed.
- Mandatory parameter '%s' was not sent, was empty/null, or malformed.
- Param '%s' or '%s' must be sent, but both were empty/null!
-1103 UNKNOWN_PARAM
- An unknown parameter was sent.
-1104 UNREAD_PARAMETERS
- Not all sent parameters were read.
- Not all sent parameters were read; read '%s' parameter(s) but was sent '%s'.
-1105 PARAM_EMPTY
- A parameter was empty.
- Parameter '%s' was empty.
-1106 PARAM_NOT_REQUIRED
- A parameter was sent when not required.
- Parameter '%s' sent when not required.
-1108 BAD_ASSET
- Invalid asset.
-1109 BAD_ACCOUNT
- Invalid account.
-1110 BAD_INSTRUMENT_TYPE
- Invalid symbolType.
-1111 BAD_PRECISION
- Precision is over the maximum defined for this asset.
-1112 NO_DEPTH
- No orders on book for symbol.
-1113 WITHDRAW_NOT_NEGATIVE
- Withdrawal amount must be negative.
-1114 TIF_NOT_REQUIRED
- TimeInForce parameter sent when not required.
-1115 INVALID_TIF
- Invalid timeInForce.
-1116 INVALID_ORDER_TYPE
- Invalid orderType.
-1117 INVALID_SIDE
- Invalid side.
-1118 EMPTY_NEW_CL_ORD_ID
- New client order ID was empty.
-1119 EMPTY_ORG_CL_ORD_ID
- Original client order ID was empty.
-1120 BAD_INTERVAL
- Invalid interval.
-1121 BAD_SYMBOL
- Invalid symbol.
-1125 INVALID_LISTEN_KEY
- This listenKey does not exist. Please use
POST /papi/v1/listenKey
to recreatelistenKey
-1127 MORE_THAN_XX_HOURS
- Lookup interval is too big.
- More than %s hours between startTime and endTime.
-1128 OPTIONAL_PARAMS_BAD_COMBO
- Combination of optional parameters invalid.
-1130 INVALID_PARAMETER
- Invalid data sent for a parameter.
- Data sent for parameter '%s' is not valid.
-1136 INVALID_NEW_ORDER_RESP_TYPE
- Invalid newOrderRespType.
20xx - Processing Issues
-2010 NEW_ORDER_REJECTED
- NEW_ORDER_REJECTED
-2011 CANCEL_REJECTED
- CANCEL_REJECTED
-2013 NO_SUCH_ORDER
- Order does not exist.
-2014 BAD_API_KEY_FMT
- API-key format invalid.
-2015 REJECTED_MBX_KEY
- Invalid API-key, IP, or permissions for action.
-2016 NO_TRADING_WINDOW
- No trading window could be found for the symbol. Try ticker/24hrs instead.
-2018 BALANCE_NOT_SUFFICIENT
- Balance is insufficient.
-2019 MARGIN_NOT_SUFFICIEN
- Margin is insufficient.
-2020 UNABLE_TO_FILL
- Unable to fill.
-2021 ORDER_WOULD_IMMEDIATELY_TRIGGER
- Order would immediately trigger.
-2022 REDUCE_ONLY_REJECT
- ReduceOnly Order is rejected.
-2023 USER_IN_LIQUIDATION
- User in liquidation mode now.
-2024 POSITION_NOT_SUFFICIENT
- Position is not sufficient.
-2025 MAX_OPEN_ORDER_EXCEEDED
- Reach max open order limit.
-2026 REDUCE_ONLY_ORDER_TYPE_NOT_SUPPORTED
- This OrderType is not supported when reduceOnly.
-2027 MAX_LEVERAGE_RATIO
- Exceeded the maximum allowable position at current leverage.
-2028 MIN_LEVERAGE_RATIO
- Leverage is smaller than permitted: insufficient margin balance.
40xx - Filters and other Issues
-4000 INVALID_ORDER_STATUS
- Invalid order status.
-4001 PRICE_LESS_THAN_ZERO
- Price less than 0.
-4002 PRICE_GREATER_THAN_MAX_PRICE
- Price greater than max price.
-4003 QTY_LESS_THAN_ZERO
- Quantity less than zero.
-4004 QTY_LESS_THAN_MIN_QTY
- Quantity less than min quantity.
-4005 QTY_GREATER_THAN_MAX_QTY
- Quantity greater than max quantity.
-4006 STOP_PRICE_LESS_THAN_ZERO
- Stop price less than zero.
-4007 STOP_PRICE_GREATER_THAN_MAX_PRICE
- Stop price greater than max price.
-4008 TICK_SIZE_LESS_THAN_ZERO
- Tick size less than zero.
-4009 MAX_PRICE_LESS_THAN_MIN_PRICE
- Max price less than min price.
-4010 MAX_QTY_LESS_THAN_MIN_QTY
- Max qty less than min qty.
-4011 STEP_SIZE_LESS_THAN_ZERO
- Step size less than zero.
-4012 MAX_NUM_ORDERS_LESS_THAN_ZERO
- Max mum orders less than zero.
-4013 PRICE_LESS_THAN_MIN_PRICE
- Price less than min price.
-4014 PRICE_NOT_INCREASED_BY_TICK_SIZE
- Price not increased by tick size.
-4015 INVALID_CL_ORD_ID_LEN
- Client order id is not valid.
- Client order id length should not be more than 36 chars
-4016 PRICE_HIGHTER_THAN_MULTIPLIER_UP
- Price is higher than mark price multiplier cap.
-4017 MULTIPLIER_UP_LESS_THAN_ZERO
- Multiplier up less than zero.
-4018 MULTIPLIER_DOWN_LESS_THAN_ZERO
- Multiplier down less than zero.
-4019 COMPOSITE_SCALE_OVERFLOW
- Composite scale too large.
-4020 TARGET_STRATEGY_INVALID
- Target strategy invalid for orderType '%s',reduceOnly '%b'.
-4021 INVALID_DEPTH_LIMIT
- Invalid depth limit.
- '%s' is not valid depth limit.
-4022 WRONG_MARKET_STATUS
- market status sent is not valid.
-4023 QTY_NOT_INCREASED_BY_STEP_SIZE
- Qty not increased by step size.
-4024 PRICE_LOWER_THAN_MULTIPLIER_DOWN
- Price is lower than mark price multiplier floor.
-4025 MULTIPLIER_DECIMAL_LESS_THAN_ZERO
- Multiplier decimal less than zero.
-4026 COMMISSION_INVALID
- Commission invalid.
%s
less than zero.%s
absolute value greater than%s
-4027 INVALID_ACCOUNT_TYPE
- Invalid account type.
-4028 INVALID_LEVERAGE
- Invalid leverage
- Leverage
%s
is not valid - Leverage
%s
already exist with%s
-4029 INVALID_TICK_SIZE_PRECISION
- Tick size precision is invalid.
-4030 INVALID_STEP_SIZE_PRECISION
- Step size precision is invalid.
-4031 INVALID_WORKING_TYPE
- Invalid parameter working type
- Invalid parameter working type:
%s
-4032 EXCEED_MAX_CANCEL_ORDER_SIZE
- Exceed maximum cancel order size.
- Invalid parameter working type:
%s
-4033 INSURANCE_ACCOUNT_NOT_FOUND
- Insurance account not found.
-4044 INVALID_BALANCE_TYPE
- Balance Type is invalid.
-4045 MAX_STOP_ORDER_EXCEEDED
- Reach max stop order limit.
-4046 NO_NEED_TO_CHANGE_MARGIN_TYPE
- No need to change margin type.
-4047 THERE_EXISTS_OPEN_ORDERS
- Margin type cannot be changed if there exists open orders.
-4048 THERE_EXISTS_QUANTITY
- Margin type cannot be changed if there exists position.
-4049 ADD_ISOLATED_MARGIN_REJECT
- Add margin only support for isolated position.
-4050 CROSS_BALANCE_INSUFFICIENT
- Cross balance insufficient.
-4051 ISOLATED_BALANCE_INSUFFICIENT
- Isolated balance insufficient.
-4052 NO_NEED_TO_CHANGE_AUTO_ADD_MARGIN
- No need to change auto add margin.
-4053 AUTO_ADD_CROSSED_MARGIN_REJECT
- Auto add margin only support for isolated position.
-4054 ADD_ISOLATED_MARGIN_NO_POSITION_REJECT
- Cannot add position margin: position is 0.
-4055 AMOUNT_MUST_BE_POSITIVE
- Amount must be positive.
-4056 INVALID_API_KEY_TYPE
- Invalid api key type.
-4057 INVALID_RSA_PUBLIC_KEY
- Invalid api public key
-4058 MAX_PRICE_TOO_LARGE
- maxPrice and priceDecimal too large,please check.
-4059 NO_NEED_TO_CHANGE_POSITION_SIDE
- No need to change position side.
-4060 INVALID_POSITION_SIDE
- Invalid position side.
-4061 POSITION_SIDE_NOT_MATCH
- Order's position side does not match user's setting.
-4062 REDUCE_ONLY_CONFLICT
- Invalid or improper reduceOnly value.
-4063 INVALID_OPTIONS_REQUEST_TYPE
- Invalid options request type
-4064 INVALID_OPTIONS_TIME_FRAME
- Invalid options time frame
-4065 INVALID_OPTIONS_AMOUNT
- Invalid options amount
-4066 INVALID_OPTIONS_EVENT_TYPE
- Invalid options event type
-4067 POSITION_SIDE_CHANGE_EXISTS_OPEN_ORDERS
- Position side cannot be changed if there exists open orders.
-4068 POSITION_SIDE_CHANGE_EXISTS_QUANTITY
- Position side cannot be changed if there exists position.
-4069 INVALID_OPTIONS_PREMIUM_FEE
- Invalid options premium fee
-4070 INVALID_CL_OPTIONS_ID_LEN
- Client options id is not valid.
- Client options id length should be less than 32 chars
-4071 INVALID_OPTIONS_DIRECTION
- Invalid options direction
-4072 OPTIONS_PREMIUM_NOT_UPDATE
- premium fee is not updated, reject order
-4073 OPTIONS_PREMIUM_INPUT_LESS_THAN_ZERO
- input premium fee is less than 0, reject order
-4074 OPTIONS_AMOUNT_BIGGER_THAN_UPPER
- Order amount is bigger than upper boundary or less than 0, reject order
-4075 OPTIONS_PREMIUM_OUTPUT_ZERO
- output premium fee is less than 0, reject order
-4076 OPTIONS_PREMIUM_TOO_DIFF
- original fee is too much higher than last fee
-4077 OPTIONS_PREMIUM_REACH_LIMIT
- place order amount has reached to limit, reject order
-4078 OPTIONS_COMMON_ERROR
- options internal error
-4079 INVALID_OPTIONS_ID
- invalid options id
- invalid options id: %s
- duplicate options id %d for user %d
-4080 OPTIONS_USER_NOT_FOUND
- user not found
- user not found with id: %s
-4081 OPTIONS_NOT_FOUND
- options not found
- options not found with id: %s
-4082 INVALID_BATCH_PLACE_ORDER_SIZE
- Invalid number of batch place orders.
- Invalid number of batch place orders: %s
-4083 PLACE_BATCH_ORDERS_FAIL
- Fail to place batch orders.
-4084 UPCOMING_METHOD
- Method is not allowed currently. Upcoming soon.
-4085 INVALID_NOTIONAL_LIMIT_COEF
- Invalid notional limit coefficient
-4086 INVALID_PRICE_SPREAD_THRESHOLD
- Invalid price spread threshold
-4087 REDUCE_ONLY_ORDER_PERMISSION
- User can only place reduce only order
-4088 NO_PLACE_ORDER_PERMISSION
- User can not place order currently
-4104 INVALID_CONTRACT_TYPE
- Invalid contract type
-4114 INVALID_CLIENT_TRAN_ID_LEN
- clientTranId is not valid
- Client tran id length should be less than 64 chars
-4115 DUPLICATED_CLIENT_TRAN_ID
- clientTranId is duplicated
- Client tran id should be unique within 7 days
-4118 REDUCE_ONLY_MARGIN_CHECK_FAILED
- ReduceOnly Order Failed. Please check your existing position and open orders
-4131 MARKET_ORDER_REJECT
- The counterparty's best price does not meet the PERCENT_PRICE filter limit
-4135 INVALID_ACTIVATION_PRICE
- Invalid activation price
-4137 QUANTITY_EXISTS_WITH_CLOSE_POSITION
- Quantity must be zero with closePosition equals true
-4138 REDUCE_ONLY_MUST_BE_TRUE
- Reduce only must be true with closePosition equals true
-4139 ORDER_TYPE_CANNOT_BE_MKT
- Order type can not be market if it's unable to cancel
-4140 INVALID_OPENING_POSITION_STATUS
- Invalid symbol status for opening position
-4141 SYMBOL_ALREADY_CLOSED
- Symbol is closed
-4142 STRATEGY_INVALID_TRIGGER_PRICE
- REJECT: take profit or stop order will be triggered immediately
-4144 INVALID_PAIR
- Invalid pair
-4161 ISOLATED_LEVERAGE_REJECT_WITH_POSITION
- Leverage reduction is not supported in Isolated Margin Mode with open positions
-4164 MIN_NOTIONAL
- Order's notional must be no smaller than 5.0 (unless you choose reduce only)
- Order's notional must be no smaller than %s (unless you choose reduce only)
-4165 INVALID_TIME_INTERVAL
- Invalid time interval
- Maximum time interval is %s days
-4183 PRICE_HIGHTER_THAN_STOP_MULTIPLIER_UP
- Price is higher than stop price multiplier cap.
- Limit price can't be higher than %s.
-4184 PRICE_LOWER_THAN_STOP_MULTIPLIER_DOWN
- Price is lower than stop price multiplier floor.
- Limit price can't be lower than %s.
50xx - Order Execution Issues
-5021 FOK_ORDER_REJECT
- Due to the order could not be filled immediately, the FOK order has been rejected.
-5022 GTX_ORDER_REJECT
- Due to the order could not be executed as maker, the Post Only order will be rejected.